The scorpION3 bar utilizes SIMCO’s innovative and effective microcontroller intelligent ionization technology. The system provides rapid neutralization of static charges over a localized work area or a mini environment. It is the most flexible and efficient system available, capable of eliminating electrostatic discharge (ESD) and preventing electrostatic attraction (ESA) of particles to surfaces. The scorpION3’s design allows multiple bars to be connected together into a system that operates synchronously without the added expense and installation of a dedicated controller, adding cost effectiveness to its features.
Air Assist (optional)
If the scorpION3 bar has Air Assist, the inlet fitting will be located on the end of the bar with the fault output jack. This fitting is a ¼” quick connect suitable for typical plastic tubing (1/4”OD polyethylene, polyurethane, nylon, etc). To make connection with the fitting, insert the tubing until it stops. To remove tubing from the fitting, depress the collar on the fitting and pull the tubing out of the fitting. Compressed air or nitrogen may be used, however, it must be clean, dry and oil free. While the maximum allowable input pressure is 700 kPa (100 psi), the recommended nominal operating pressure is 200 kPa (30 psi).
Features Include:
- Tool Interface Integration
- "Peak Reduction" Technology
- Bi-directional Intelligent MMI
- Full Digital Platform
- Active Ion Monitor and Control
- SIC Emitters (US and International patents pending)
| .jpg)
|
