CenturION DDI Overhead Blower

The Centurion DDI produces ionized air with a balanced ion content. The ion offset voltage is continuously monitored and corrected through a combination of patented emitter arrays and control circuitry. Directing the unit’s airflow onto an object will eliminate existing static charges and prevent the formation of additional charge.

Specifications:
Discharge Time	1,000 – 100V < 1.5 seconds at 12 inches from work surface (30.5cm)
	1,000 – 5V < 2.5 seconds at 12 inches from work surface (30.5cm)
Offset voltage	3V from set point, set point adjustable to 0 V.
OPERATION SPECIFICATIONS
Power Usage	45W
Line Voltage	Universal input, 100-240 VAC, 50/60Hz, via IEC 320 connector
Coverage Area	(3 fan) 2’ x 4’ Area
Ambient Temp	32degree F (0degree C) to 122degree F (50degree C)
Air Flow (each fan)	140 CFM (60 l/s)
Audible Noise	53 dB(A) measured 2 ft. (61 cm) from unit
Power OFF/ON	End panel line cord connect / disconnect
Fan Speed	High Speed, non-adjustable
Offset Balance	Adjustable to zero. Independent adjustment is provided for each emitter
	array. (Adjustment access holes are located in the front panel of the unit).
Indicators	Green, Power- on light
	Red, Fault light (normally off). Red light– on indicates emitter electrode
	pin maintenance required or an error condition.
Reset	Automatic
Maintenance	Built-in emitter point cleaner. (Rotate knob at the emitter array- air intake
	clockwise one revolution and release).
MECHANICAL SPECIFICATIONS
Emitter Points	Tungsten or Titanium (model dependent)
Enclosure	Stainless steel, bright annealed
Enclosure Size	(3 fan) 6” wide X 2 ¾” high X 40” long (152cm X 70cm X 1016cm)
	(2 fan) 6” wide X 2 ¾ high X 26” long (152cm X 70cm X 660cm)
Weight	(3 fan) 14 lbs. (6.3kg)
	(2 fan) 11 lbs. (4.9kg)
Approvals	Independent safety and regulatory certification pending.

Download Files

To view literature that has been downloaded or while online, you need to have Adobe Acrobat Reader installed on your computer.

Overhead Blowers